Why choose D-SVP hydraulic cnc press brake machine ?Compared with the traditional electro-hydraulic press brake machine, the double servo pump-controlled hydraulic press brake machine has many advantages, compared with the traditional device, the power consumption can be saved by 60%, the work efficiency can be increased by 30% (reduce cycle time), the positioning accuracy is more accurate, up to 5um, the noise is reduced, the machine tool works more quietly, the hydraulic oil usage is very small, only 30% of the traditional. Machine tools are easier to manufacture, easier to maintain, and have lower failure rates. System features: Minimize overflow losses. It can realize stepless speed regulation. Adjustment range 0 to Max. Precise demand fuel allocation, optimized by dynamic servo motor speed. For the dual servo pump control of two-way pump servo control and ordinary direction valve control, it has the characteristics of more smooth operation, simple installation, beautiful appearance, reliable performance, simple control and low failure rate. There is no idle power, and the servo motor can be turned off when flow or pressure is not needed. In a close design, the tank assembly and the cylinder are connected together by a transition block. There's no plumbing connection. Further improve cleanliness. Make machine tool manufacturing easier.
Impact on the environment and cost of use Energy consumption/cost and thermal balance are significantly reduced, reducing CO2 emissions. The installed capacity is reduced. The servo motor can be significantly overloaded in a short time. Can reduce the tank volume, reduce the use of hydraulic oil. The oil use is only 30% of the traditional.
Reduce or eliminate cooling of hydraulic oil. The service life of hydraulic oil is extended because it is always working at room temperature.
Compared with the traditional electro-hydraulic bending machine, it also has the advantage of reducing noise.
Post time: Jun-07-2024