Construction
A bending machine is a machine that can bend thin sheets. Its structure mainly includes a bracket, a worktable and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a seat shell, a coil and a cover plate. Inside the recess of the seat shell, the top of the recess is covered with a cover plate.
Use
When in use, the coil is energized by the wire, and after the electricity is energized, the pressure plate is gravitationalized, so as to realize the clamping of the thin plate between the pressure plate and the base. Due to the use of electromagnetic force clamping, the pressing plate can be made into various workpiece requirements, and the workpiece with side walls can be processed.
Classification
A bending machine is a machine that can bend thin sheets. Its structure mainly includes a bracket, a worktable and a clamping plate. The worktable is placed on the bracket. The worktable is composed of a base and a pressure plate. The base is connected to the clamping plate by a hinge. The base is composed of a seat shell, a coil and a cover plate. Inside the recess of the seat shell, the top of the recess is covered with a cover plate.
Composition Is Introduced
1. Slider part: hydraulic transmission is adopted, and the slider part is composed of a slider, an oil cylinder and a mechanical stopper fine-tuning structure. The left and right oil cylinders are fixed on the frame, and the piston (rod) drives the slider to move up and down through hydraulic pressure, and the mechanical stop is controlled by the numerical control system to adjust the value;
2. Worktable part: operated by the button box, the motor drives the material stopper to move back and forth, and the distance of movement is controlled by the numerical control system, and the minimum reading is 0.01 mm (there are limit switches at the front and rear positions);
3. Synchronization system: The machine consists of a mechanical synchronization mechanism composed of torsion shaft, swing arm, joint bearing, etc., with simple structure, stable and reliable performance, and high synchronization accuracy. The mechanical stop is adjusted by the motor, and the numerical control system controls the value;
4. Material stopper mechanism: The material stopper is driven by a motor, which drives the two screw rods to move synchronously through chain operation, and the numerical control system controls the stopper size.
Post time: Apr-25-2022